KIJIMA Замки для шлемов

KIJIMA Замок для шлема

Why would the OEM remove the Seat and make it a Helmet holder with Wire?I can't think of anything other than Cost, but I'm going to launch it as a Tourer and put the luggage in the Tandem seat. You don't think there's anything to print...OEM Helmet holder that you can't use when you load up on the S...

Прочитайте больше

Подробности Товара

KIJIMA Замок для шлема

It's easy to install, and it clicks into the gap between the framesHowever, when I try to use it, the Helmet interferes with the Tandem FootpegLargeThey don't use it because they don't want to get a large Helmet or get damaged

Прочитайте больше

Подробности Товара

KIJIMA Замок для шлема

As you wrote, you don't have to remove the Seat anymore It hits next to the Number, and I was wondering if it would scratch the Helmet

Прочитайте больше

Подробности Товара

KIJIMA Замок для шлема

Helmet lock for HondaCB400 is installed with a pipe, so it is universal There is Unfortunately, I couldn't find the inside diameter written in Catalogue or word of mouth I'll write it down The inner diameter of the smallest Small was 30mm (Photo.) The plate Screw is M6× 35mm Maybe the Pipe on Honda ...

Прочитайте больше

Подробности Товара

KIJIMA Замок для шлема

Yamaha's YZF-R1 (2016) It is used for modelsI had been using Universal Product's Helmet lock until then I had a problem with the helmet lock itself shifting, so I had to buy a special I decidedThe deciding factor in the purchaseThis is the cheapest Helmet lock for the YZF-R1 and is the cheapest moto...

Прочитайте больше

Подробности Товара

KIJIMA Замок для шлема

I didn't wear it because I didn't want to be without it, but I was having trouble with the Helmet when I was touring I ended up buying it because I knew I needed itIt's easy to put on, but Motorcycle's Screw is harder than the others So be really careful not to lick itI worked with Side Back Support...

Прочитайте больше

Подробности Товара

KIJIMA Замок шлема

The KIJIMAHelmet lock is easy to use and is highly recommendedThe OEMHook is hard to use, so I think it's a must-have item for everyday useIt's nice and unobtrusive and looks like an OEM

Прочитайте больше

Подробности Товара

KIJIMA Якорь для мотошлема

The feel and look of the Helmet is great in the hand and in use I felt it was difficult to do, but this made it easy to parenthesis well

Прочитайте больше

Подробности Товара

KIJIMA Замок для шлема

My Motorcycle doesn't have a Helmet holder, so it comes in handyLineup didn't have its own year, but I processed it and used it

Прочитайте больше

Подробности Товара

KIJIMA Якорь для мотошлема

When you set Z-7 of SHOEI as a holder set, it is a little bit tighter, Smooth and When I was searching, I found a special product like this one, which can be set as a holder I purchased it I will check and re-improve it when it arrives

Прочитайте больше

KIJIMA Замки для шлемов

Недавно просмотренные продукты