- Подходит для:
- YAMAHA WR250X note (supplementary information) symbol
- SUZUKI
Bought 2. I broke the original FMF muffler clamp as it rusted, this clamp did not rust and holds perfectly as it should
Perfect for securing a secure seal between the muffler and the header pipe. Muc...Прочитайте больше - [How is it used?It is used on a 2022 CRF250RX.The Exhaust pipe is directly on the side of the body, so if it falls over and gets caught between the legs, it will likely not be hot enough.I heard that ...Прочитайте больше
- Used for FMF exhaust pipe.The Large is perfect and does not get hot, so it will not burn clothing on contact.The product is not bad looking, and I think it is functional & well-designed.Прочитайте больше
- Подходит для:
- HONDA XR250 95-07
- HONDA XR250 Baja 95-07
- HONDA XR250 Motard 95-07
- HONDA XR400 Motard 05-08
I bought this product because my XR250MOTARD was leaking gas from the joint gasket and it was bothering my neighbors. the KITACO product was cheaper, but I wanted to stop the leaking completely and it...Прочитайте больше - I replaced the exhaust pipe with a Specht exhaust pipe and the OEM Heat Guard moved outward a bit. Sometimes Jeans gets hot so I change it before I get burned.As you can see in the picture, the heat s...Прочитайте больше
- Подходит для:
- YAMAHA WR250X note (supplementary information) symbol
- SUZUKI
Yes, my Yoshimurars-4J is currently struggling with exhaust leaks, but I found out that the clamp on the mid pipe is not properly tightened to a perfect circle.So my wife picked up a Barrel4 before. (...Прочитайте больше - Подходит для:
- YAMAHA WR250X note (supplementary information) symbol
- SUZUKI
For some reason, my wife picked up the lightest Barrel4 from somewhere and brought it home to use on her WR250X for course riding, but it didn't come with this clamp, so I bought it. The stainless ste...Прочитайте больше - Подходит для:
- YAMAHA WR250X 07-17
- YAMAHA WR250R 07-17
- HONDA CRF250 RALLY 17-20
- YAMAHA YZ450F 17-21
Thank you, WEBIKE! I didn't think I would ever find the right part. This exhaust joint gasket fits the Delta Barrel 4 Exhaust. I didn't have a caliper to measure the exact fit of the exhaust joint and...Прочитайте больше - OEM Product is not so good, but I'm glad I bought this Heat Guard because it looks great.However, it is thinner than I had imagined and I would like it to be made more firmly.Прочитайте больше
- It is easy to install because it can be bent freely along the exhaust pipe. It is easy to install because it can be bent freely along the exhaust pipe.Прочитайте больше
- Подходит для:
- KAWASAKI D Tracker 125 10-16
- KAWASAKI KLX150 09-13
- KAWASAKI KLX125 10-16
I bought it again because it was new and somehow it got into the back of the MiddlePipe.I've bought JMCA Certified for places where I can't run without changing the exhaust system many times, but the ...Прочитайте больше - I machined and attached it to the BEAMS front pipe.The standard Guard melted the hem of the Pants.Since it is a commuter main, I decided to float it from the pipe to increase the effect as Heat Guard....Прочитайте больше
- When I replaced it with the 4 Strike Competition Exhaust Pipe of RSV, I installed it for the purpose of heat protection and shielding.important item[Was there anything that disappointed you?It's not a...Прочитайте больше
- Подходит для:
- YAMAHA WR250X note (supplementary information) symbol
- SUZUKI
This is used for the connecting part of the front pipe and the rear piece of WR250X. The system is Full titanium of beams. I change it periodically because the heat gnaws the threaded part of Clamps w...Прочитайте больше - Installed on YOSHIMURAExhaust System Up TypeBefore the installation, the base of the exhaust system was so hot that it melted the Pants, but it was He was wearing it, so it doesn't seem to matterПрочитайте больше
- I bought it to fit the FMF Mega bomb At first, I put it on the back of the Thai Co-part and on the part that interferes with the raising and lowering of the legs (Band is best for this part of the exh...Прочитайте больше
- I'm not going to mention its performance as a Heat Guard since it's knownThis time I tried to install it on the Mega BombIt was not possible to install it as it was, but I bent it to widen the Band at...Прочитайте больше
- When running a Dirt, the exhaust pipe is full of small stones, etc InstalledIt is easy to install because it can be bent along the curve of the exhaust pipeIt's good for dressing up as well as protect...Прочитайте больше
- Подходит для:
- KAWASAKI KLX250 93-99
- KAWASAKI KLX250ES 93-99
- KAWASAKI KLX250SR 93-99
- KAWASAKI D tracker 93-99
I installed it in the OEM joint of KLX250SRThe outer diameter was Exactly, but the inner diameter was too big and there was no space between the clamps no matter how much you tighten the clamps It fel...Прочитайте больше - D I have it attached to the TrackerIt has been about seven and a half years since I installed itThe thing itself is sturdy and doesn't bend or dent when it falls overWhen you wear Boots, the exhaust p...Прочитайте больше
САМЫЙ БОЛЬШОЙ
МАГАЗИН В ЯПОНИИ
РАСПРОДАЖИ,
АКЦИИ, СКИДКИ
БЫСТРАЯ
ДОСТАВКА