brembo Тормозные суппорты

brembo Тормозной суппорт P4 30/34 40мм

I also had the Master Cylinder replaced at the shop and the touch became very goodThe CBR250R, which had improved its power output by adding a lot of things (MC41) It was Exactly toIt's a great Touch that starts to work as much as you hold Lever for a bitI was very happy with it

Прочитайте больше

Подробности Товара

brembo Р2 32 Задний Суппорт

I bought the Caliper, which I had been wanting to buy for a while, and the chic Black one It's a lot better than the previous NIS◯N product It looks a lot better than the previous NIS◯◯N products I think it works just fine I just had to replace a lot of Other parts to put this on

Прочитайте больше

Подробности Товара

brembo Тормозной суппорт P4 30/34 40мм

At first, I bought and installed it with the looks, but it is the counterpart Caliper piston It requires only half the power of a normal caliperI can't do full Breaking, etc. because I'm afraid of itI'm currently enjoying Breaking and driving

Прочитайте больше

Подробности Товара

brembo Р2 32 Задний Суппорт

This is a change from NISSINCaliperIt's not a bad idea At 173mm width, there is wheel rim interference The condition is in millimeter As a result, I decided to change the wide stem

Прочитайте больше

Подробности Товара

brembo CNC Тормозной суппорт P4 30/34 40мм

I just overhauled a 4-pot RACING that I've used for 25 years, and it's a RightCaliper Seal We found corrosion on the top of the slug of the, so we had to update it! (The Left Side has had no problems and continues to be used.)The old one was a beautiful champagne gold (see photo) and priced at 85,00...

Прочитайте больше

Подробности Товара

brembo тормоза суппорт P4 30/34 40мм

i wanted to switch to bremboCasting, but I used Gold's Caliper in another car before The Gun meta color is used to blend in with the motorcycle because the look of the bike doesn't feel rightI made a single disc with the Rotor of SUNSTAR, but it is controllable and braking Enough powerThe looks are ...

Прочитайте больше

Подробности Товара

brembo Тормозной суппорт P4 30/34 40мм

My Motorcycle OEMBrake is a Nissshin single-pressed 2-pot It's a combination of Caliper and Single disc, but it's a 200kgOver I wondered how it would be with the front brake of a large car and changed it to this oneSupport is a Material found on Net:It's aluminum, and MASTER and DISCUSSION are NORMA...

Прочитайте больше

Подробности Товара

brembo Р2 32 Задний Суппорт

For use with 250mmRear DiscsI don't know if it's the MASTER diameter of the OEMSize or the Rotor diameter or the Brake Pads I'm not sure if it's the Caliper piston or if it's too elemental, but it doesn't work! The "pistol-grip" is more for attitude control than for braking It's more for attitude co...

Прочитайте больше

Подробности Товара

brembo Тормозной суппорт P4 30/34 40мм

If you are using Caliper support, you can adjust the rigidity of the single body to suit your needs I think it would be a performance degradation for Large bodies if you think in terms ofBut along with that, you can change the effect of Brake by changing the disc diameter and so on That's where the ...

Прочитайте больше

Подробности Товара

brembo Радиальное крепление Тормозной суппорт P4 3...

I bought this for the OEM return of the S1000RR (2017)Pitch is 100mm, so be careful here It is safe to check the Pitch of the CaliperMount of confidence beforehandi think it's the least expensive of brembo's RADIAL CALIPERs, and it's a Monoblock I think those who are particular about it need to be c...

Прочитайте больше

brembo Тормозные суппорты

Недавно просмотренные продукты