- Подходит для:
- SUZUKI
- SUZUKI RM-Z250 08-18
- SUZUKI RM-Z450 08-21
- SUZUKI RM250 05-08
- SUZUKI DR-Z400SM 04-17
- ...и более.
The brake pin looked like oem quality and fit inside the caliper perfectly. DRC products are really good, a little bit expensive. I prefer hex head instead of allen. Especially when allen tend to take...Прочитайте больше - Подходит для:
- YAMAHA WR250R 07-17
I bought it because the OEM came out with Stages.It looks polished and has a high quality feel, and it is stainless steel, so I expect it to be rustproof and durable.The smooth surface may also improv...Прочитайте больше - Подходит для:
- YAMAHA WR250X 07-17
When I did the Pad replacement, I saw that the Pin was stepped and worn.The minus on the cap of the pin was so hard that it was about to break, and I had to tighten it loosely, but if I licked it, the...Прочитайте больше - When I changed the Rear Sets on my GSR750, I couldn't use the original Brake switch, so I bought this product.As it turns out, the description also says Oil pressure sensitive brake switch for use wit...Прочитайте больше
- I bought it because I needed it to hydraulize my Clutch switch.Quality.The color is not too polished.It came with a Bullet Type Terminal, so I didn't have to buy it!Прочитайте больше
- Подходит для:
- SUZUKI
- SUZUKI RM-Z250 08-18
- SUZUKI RM-Z450 08-21
- SUZUKI RM250 05-08
- SUZUKI DR-Z400SM 04-17
- ...и более.
These are the parts that need to be replaced from time to time because of the decrease in the number of steps. The head is 8mm in the hexagon.You can remove it with TWrench, so it's easy to maintain.Прочитайте больше - Подходит для:
- KAWASAKI KX450F 06-18
- SUZUKI RM-Z250 04-06
- KAWASAKI KX250F 04-18
- KAWASAKI KX125 97-08
- KAWASAKI KX250 97-08
- ...и более.
I changed a lot of parts along with the brakeOHThe original Pin was textured with rustThis will make Maintenance a breezeOne thing I was worried about, though, is thatI was wondering if I could use So...Прочитайте больше - Подходит для:
- YAMAHA WR250X 07-17
I changed it while changing the Pad of WR250XUnlike OEMs, Material:Stainless Steel, rust-resistant, slotted screwdriver for replacement You will be able to avoid usingI can't think of any other Merit ...Прочитайте больше - Подходит для:
- YAMAHA WR250X 07-17
Removed OEM RetainerBolt, although there is no step, but rust and dirt are conspicuous, I think that I can reuse it if I polish But dare to exchange it to DRC.Easy to install, just remove and replace....Прочитайте больше - I bought it with brembo's Universal, but I bought it but the Size was Large.I hope I can divert it to something solely for expensive price, rather than my research shortage.Прочитайте больше
- Подходит для:
- YAMAHA WR250X 07-17
After buying a used WR250X, I installed it to fit a full overhaul around Brake It wasIf you are an OEM, you can use a slotted screwdriver before accessing the pin It is necessary to remove PinPlug, bu...Прочитайте больше - Подходит для:
- YAMAHA WR250R 07-17
I think that it's worth it just getting better without removing the OEM's Minus screw.I am using Stainless Steel every time for various car models thinking that it is also strong against rust.Прочитайте больше - Подходит для:
- KAWASAKI D tracker 98-07
- YAMAHA YZ450FX 16-18
- YAMAHA YZ450F 03-21
- YAMAHA YZ426F 00-02
- YAMAHA YZ400F 98
- ...и более.
I used it for the compatible model but the length of Pin for the rear wheel Caliper is long and it seems to interfere with Spoke.Another Size of the other company's Motorcycle matched it, so I use...Прочитайте больше - Подходит для:
- KAWASAKI D tracker 98-07
- YAMAHA YZ450FX 16-18
- YAMAHA YZ450F 03-21
- YAMAHA YZ426F 00-02
- YAMAHA YZ400F 98
- ...и более.
DR-Z400SM (07 year) Was attached to,Front can be exchanged directly from OEM.For Rear, OEMSpec. As it is,Part of the Brake Body side that receives the end of the brake pin is tapered,Corresponding par...Прочитайте больше - Подходит для:
- KAWASAKI D tracker 98-07
- YAMAHA YZ450FX 16-18
- YAMAHA YZ450F 03-21
- YAMAHA YZ426F 00-02
- YAMAHA YZ400F 98
- ...и более.
OEM Screw will become unnecessary and rust will be less likely to occur so it will be extremely helpful. It is easy to maintain.The price is also cheap, so buy and there is no loss.Do not forget Greas...Прочитайте больше - Since I was not compatible with Normal switch when exchanging with outside Rear Sets, I purchased this item. Timing of Brake was also Response good and could be installed without problems. However, it...Прочитайте больше
- Подходит для:
- KAWASAKI D tracker 98-07
- YAMAHA YZ450FX 16-18
- YAMAHA YZ450F 03-21
- YAMAHA YZ426F 00-02
- YAMAHA YZ400F 98
- ...и более.
I replaced it because the OEM was rusty.The OEM removes the Blind lid and removes the Pin in it at Hexagonal Wrench.This product is only Double-end Wrench and can be easily replaced.Прочитайте больше - When I converted it to Rear Sets, OEM's Brake switch almost ceased to be attached, so I bought this item.I expect durability because the price is cheap compared to that of other Brand's and th...Прочитайте больше
- The commodity itself works properly for the price. Combined with Stainless mesh hose of Swage line, Brake fluid leaked in Aluminum Washer included. It stopped properly as Copper Washer of Swage line...Прочитайте больше
- OEM Switch failed, Repair Parts was unavailable at the end of sale, so it was not possible to divert from other models, so purchase (It is cheaper than purchasing a complete set of master Cylinder due...Прочитайте больше
САМЫЙ БОЛЬШОЙ
МАГАЗИН В ЯПОНИИ
РАСПРОДАЖИ,
АКЦИИ, СКИДКИ
БЫСТРАЯ
ДОСТАВКА