It is outside the compatible model but if you make Hose outside, it seems that it seems to come with no particular problem, so purchaseBecause I interrupted oil temperature sensor in the form of Banjo, I could not use Standard's BracketVarious processing required and it was Large and unwieldyPer...
SP TAKEGAWA (Special Parts TAKEGAWA) High Flow КРА...
I exchanged Fuel Cock with Bore up of MONKEY. I just purchased it with Manufacturer recommendation, but I can use it without particular problems. Previously, I used the normal Size of the same Manufacturer, but when removing it, the Mesh part bulged out and I had a hard time pulling out.There is a p...
I bought it only for 4 V + R for Spa, so I bought it, but what is it that only Slim line. I understand oil pressure securing, but I feel that it will not get cold if this is too thin. I want you to release the data of oil temperature and hydraulic pressure other than Hose. Hose and Banjoetc. It gets...
SP TAKEGAWA (Special Parts TAKEGAWA) топлива Cock ...
When I exchanged carburetor Normal cook bought to replace because it was bad for Fuel Hose to be handled. As Right comes out, Hose is also short, so efficiency is satisfying and satisfying. Installation was also easy, there are also cheaper, but I chose this for a sense of security.
SP TAKEGAWA (Special Parts TAKEGAWA) High Flow КРА...
I changed the Fuel Cock because I made carburetor Large. It seems to be 1 Size Large as compared with NORMAL, and it will understand that the flow rate will increase even if it looks. Since I changed it at the same time as carburetor change, I do not know the difference with NORMAL, but it seems to ...
SP TAKEGAWA (Special Parts TAKEGAWA) High Flow КРА...
When a carburetor was exchanged for a YOSHIMURA, it was not canceled although various carburetors were arranged in the state where ? leveling off of whether fuel ran short at high speed was carried out, and it became impossible to blow, and the problem was solved when changing into the High-flow Coo...
SP TAKEGAWA (Special Parts TAKEGAWA) Шланг сепарат...
Since a solid oil cooler kit is attached to the ape which carried out bore up and it is exchanging for the aluminum diecast cover, the mesh hose of a slim line seems not to interfere in a muffler (exhaust pipe portion) -- This hose separator was put in in between (^u^) Since fixation was perfectly c...
SP TAKEGAWA (Special Parts TAKEGAWA) High Flow КРА...
Since the oil pump was strengthened, it purchases in passing. Although not borrowed by not quite satisfactory, since the fuel cook was rusty, the effect of the high flow was good exactly.
? 
САМЫЙ БОЛЬШОЙ
МАГАЗИН В ЯПОНИИ
РАСПРОДАЖИ,
АКЦИИ, СКИДКИ
БЫСТРАЯ
ДОСТАВКА